|
|
Analysis on the influencing factors of imbibition and the effect evaluation of imbibition in tight reservoirs
|
YANG Zhengming,LIU Xuewei,LI Haibo,LEI Qihong,LUO Yutian,WANG Xiangyang
|
|
|
Table 1 Basic physical properties of the core samples.
|
|
No. | Influence Factor | Length/ cm | Diameter/ cm | Permeability/ 10-3 μm2 | Poro- sity | Wett- ability | 1 | Permea- bility | 7.08 | 2.50 | 0.21 | 0.095 | Weakly water-wet | 2 | 7.23 | 2.50 | 1.52 | 0.138 | Weakly water-wet | 3 | 7.16 | 2.50 | 8.16 | 0.168 | Weakly water-wet | 4 | Frac- ture | 6.95 | 2.50 | 0.22 | 0.098 | Weakly water-wet | 5 | 6.95 | 2.50 | 0.22 | 0.010 | Weakly water-wet | 6 | Wett- ability | 7.12 | 2.50 | 0.26 | 0.101 | Strongly water-wet | 7 | 7.12 | 2.50 | 0.26 | 0.102 | Weakly water-wet | 8 | 7.12 | 2.50 | 0.26 | 0.099 | Neutral | 9 | 7.12 | 2.50 | 0.26 | 0.101 | Strongly oil-wet |
|
|
|