PETROLEUM ENGINEERING

A new physical simulation system of drilling mud invasion in formation module

  • FAN Yiren ,
  • WU Junchen ,
  • WU Fei ,
  • ZHOU Cancan ,
  • LI Chaoliu
Expand
  • 1. College of Geosciences in China University of Petroleum, Qingdao 266580, China;
    2. CNPC Key Well Logging Laboratory in China University of Petroleum, Qingdao 266580, China;
    3. Suzhou Niumag Analytical Instrument Corporation, Suzhou 215163, China;
    4. Department of Well Logging and Remote Sensing Technology, PetroChina Research Institute of Petroleum Exploration & Development, Beijing 100083, China;

Received date: 2016-08-15

  Revised date: 2016-11-23

  Online published: 2016-12-30

Abstract

After several key technologies, including the saturation and pressurization of large sample, design of invasion room, sealing and pressure maintaining of the apparatus, and dynamic monitoring of the entire invasion process were solved, a multifunctional physical simulation system of drilling mud invasion in formation module has been designed and built. By using the system, the variation patterns of formation module resistivity, pressure and mud cake parameter during the invasion are summarized. The design idea, components, and functions of each component of the system are introduced in this paper; and a drilling mud invasion experiment in the sandstone formation module was done. The experiment results show that the radial resistivity of formation module decreases in turn during brine drilling mud invasion; at the beginning of invasion, the mud cake is gradually formed with the increase of its thickness and the decrease of its porosity and permeability, and the radial pressure gradient of formation module decreases rapidly; in the middle and late periods of invasion, the mud cake properties and the radial pressure gradient of formation module become stable. The designed system, with high simulation degree, high utilization ratio and good maneuverability, can be used to reveal the invasion mechanism of drilling mud in sandstone reservoirs, analyze invasion characteristics, and improve invasion correction method for logging response and other researches.

Cite this article

FAN Yiren , WU Junchen , WU Fei , ZHOU Cancan , LI Chaoliu . A new physical simulation system of drilling mud invasion in formation module[J]. Petroleum Exploration and Development, 2017 , 44(1) : 125 -129 . DOI: 10.11698/PED.2017.01.15

References

[1] AL-MALKI N, POURAFSHARY P, AL-HADRAMI H, 等. 采用海泡石纳米颗粒控制膨润土基钻井液性能[J]. 石油勘探与开发, 2016, 43(4): 656-661.
AL-MALKI N, POURAFSHARY P, AL-HADRAMI H, et al. Controlling bentonite-based drilling mud properties using sepiolite nanoparticles[J]. Petroleum Exploration and Development, 2016, 43(4): 656-661.
[2] KRUGER R. Evaluation of drilling-fluid filter-loss additives under dynamic conditions[J]. Journal of Petroleum Technology, 1963, 15(1): 90-98.
[3] WARREN B K, SMITH T R, RAVI K M. Static and dynamic fluid-loss characteristics of drilling fluids in a full-scale wellbore[R]. SPE 26069, 1993.
[4] SHAW J C, CHEE T. Laboratory evaluation of drilling mud systems for formation damage prevention in horizontal wells[R]. SPE 37121, 1996.
[5] BEDRIKOVETSKY P, SIQUEIRA F D, FURTADO C, et al. Quantitative theory for fines migration and formation damage[R]. SPE 128384, 2010.
[6] SALAZAR J M, MARTIN A J. Rock quality assessment using the effect of mud-filtrate invasion on conflicting borehole resistivity measurements[J]. Geophysics, 2012, 77(3): 65-78.
[7] 范宜仁, 胡云云, 李虎, 等. 泥饼动态生长与泥浆侵入模拟研究[J]. 测井技术, 2013, 37(5): 466-471.
FAN Yiren, HU Yunyun, LI Hu, et al. Numerical simulation of mud-cake dynamic formation and reservoir mud filtrate invasion[J]. Well Logging Technology, 2013, 37(5): 466-471.
[8] TOVAR J G, MARTINEZ A, BOCKH A, et al. Mud cake compressibility and mobility of fluid loss evaluation[R]. SPE 26980, 1994.
[9] JIAO D, SHARMA M. An experimental investigation of the resistivity profile in the flushed zone[J]. Journal of Nanchang University, 1991(1): 59-63.
[10] JIAO D, SHARMA M. Mechanism of cake buildup in crossflow filtration of colloidal suspensions[J]. Journal of Colloid and Interface Science, 1994, 162(1): 454-462.
[11] DEWAN J T, CHENEVERT M E. A model for filtration of water-based mud during drilling: Determination of mud cake parameters[J]. Petrophysics, 2001, 42(3): 237-250.
[12] 陈福煊, 孙佳戌. 泥浆滤液侵入孔隙地层径向导电特性的模拟实验[J]. 地球物理学报, 1996, 39(增刊): 371-378.
CHEN Fuxuan, SUN Jiaxu. Simulation test of radial electric conductivity during the mud filtrate invading porous formation[J]. Acta Geophycica Sinica, 1996, 39(Supp.): 371-378.
[13] FERGUSON C K, KLOTZ J A, AIME M. Filtration from mud during drilling[J]. Journal of Petroleum Technology, 1954, 6(2): 30-43.
[14] PEDEN J M, ARTHUR K G, AVALOS M. Analysis of filtration under dynamic and static conditions[R]. SPE 12503, 1984.
[15] VAUSSARD A, MARTIN M, KONIRSCH O, et al. An experimental study of drilling fluids dynamic filtration[R]. SPE 15412, 1986.
[16] WARREN B K, SMITH T R, RAVI K M. Static and dynamic fluid-loss characteristics of drilling fluids in a full-scale wellbore[R]. SPE 26069, 1993.
Outlines

/