PETROLEUM ENGINEERING

Calculation method of proppant embedment depth in hydraulic fracturing

  • CHEN Ming ,
  • ZHANG Shicheng ,
  • LIU Ming ,
  • MA Xinfang ,
  • ZOU Yushi ,
  • ZHOU Tong ,
  • LI Ning ,
  • LI Sihai
Expand
  • 1. China University of Petroleum, Beijing 102249, China
    2. CNPC Great Wall Drilling Company, Beijing 100101, China
    3. Research Institute of Petroleum Exploration and Development of SINOPEC, Beijing 100083, China

Received date: 2017-06-26

  Revised date: 2017-11-24

  Online published: 2018-01-10

Abstract

For the issue of proppant embedment in hydraulic fracturing, a new calculation method of embedment depth considering elastic-plastic deformation was proposed based on the mechanism of proppant embedment into rocks by combining proppant embedment constitutive equations and contact stresses on the rock-proppant system. And factors affecting embedment depth of proppant were analyzed using the new method. Compared with the elastic embedment model, the results calculated by the new method match well with the experimental data, proving the new method is more reliable and more convenient to make theoretical calculation and analysis. The simulation results show the process of proppant embedment into rocks is mainly elastic-plastic. The embedment depth of monolayer proppants decreases with higher proppant concentration. Under multi-layer distribution conditions, increasing the proppant concentration will not change its embedment depth. The larger the proppant embedment ratio, the more the stress-bearing proppants, and the smaller the embedment depth will be. The embedment depth under higher closure stress is more remarkable. The embedment depth increased with the drawdown of fluid pressure in the fracture. Increasing proppant radius or the ratio of proppant Young’s modulus to rock Young’s modulus can reduce the proppant embedment depth.

Cite this article

CHEN Ming , ZHANG Shicheng , LIU Ming , MA Xinfang , ZOU Yushi , ZHOU Tong , LI Ning , LI Sihai . Calculation method of proppant embedment depth in hydraulic fracturing[J]. Petroleum Exploration and Development, 2018 , 45(1) : 149 -156 . DOI: 10.11698/PED.2018.01.16

References

[1] 胥云, 陈铭, 吴奇, 等. 水平井体积改造应力干扰计算模型及其应用[J]. 石油勘探与开发, 2016, 43(5): 780-786, 798.
XU Yun, CHEN Ming, WU Qi, et al. Stress interference calculation model and its application in volume stimulation of horizontal wells[J]. Petroleum Exploration and Development, 2016, 43(5): 780-786, 798.
[2] CHEN D, YE Z H, PAN Z J, et al. A permeability model for the hydraulic fracture filled with proppant packs under combined effect of compaction and embedment[J]. Journal of Petroleum Science and Engineering, 2016, 149: 428-435.
[3] CUI A, GLOVER K, WUST R. Elastic and plastic mechanical properties of liquids-rich unconventional shales and their implications for hydraulic fracturing and proppant embedment: A case study of the Nordberg Member in Alberta Canada[R]. Minneapolis: 48th US Rock Mechanics/Geomechanics Symposium, 2014.
[4] LACY L, RICKARDS A, ALI S. Embedment and fracture conductivity in soft formations associated with HEC, borate and water-based fracture designs[R]. SPE 38590, 1997.
[5] LACY L, RICKARDS A, BILDEN D. Fracture width and embedment testing in soft reservoir sandstone[J]. SPE Drilling & Completion, 1998, 13(1): 25-29.
[6] 郭建春, 卢聪, 赵金洲, 等. 支撑剂嵌入程度的实验研究[J]. 煤炭学报, 2008, 33(6): 661-664.
GUO Jianchun, LU Cong, ZHAO Jinzhou, et al. Experimental research on proppant embedment[J]. Journal of China Coal Society, 2008, 33(6): 661-664.
[7] 卢聪, 郭建春, 王文耀, 等. 支撑剂嵌入及对裂缝导流能力损害的实验[J]. 天然气工业, 2008, 28(2): 99-101.
LU Cong, GUO Jianchun, WANG Wenyao, et al. Experimental research on proppant embedment and its damage to fractures conductivity[J]. Natural Gas Industry, 2008, 28(2): 99-101.
[8] TAN Y, PAN Z, LIU J, et al. Experimental study of permeability and its anisotropy for shale fracture supported with proppant[J]. Journal of Natural Gas Science & Engineering, 2017, 44: 250-264.
[9] ALRAMAHI B, SUNDBERG M. Proppant embedment and conductivity of hydraulic fractures in shales[R]. ARMA 12-291, 2012.
[10] DENG S, LI H, MA G, et al. Simulation of shale-proppant interaction in hydraulic fracturing by the discrete element method[J]. International Journal of Rock Mechanics & Mining Sciences, 2014, 70(9): 219-228.
[11] HUITT J, MCGLOTHLIN B. The propping of fractures in formations susceptible to propping-sand embedment[R]. API 58-115, 1958.
[12] VOLK L, RAIBLE C, CARROLL H, et al. Embedment of high strength proppant into low-permeability reservoir rock[R]. SPE 9867, 1981.
[13] LI K W, GAO Y P, LU Y C, et al. New mathematical models for calculating proppant embedment and fracture conductivity[J]. SPE Journal, 2015, 20(3): 496-507.
[14] ZHANG J J, KAMAMENOV A, ZHU D, et al. Laboratory measurement of hydraulic fracture conductivities in the Barnett shale[R]. SPE 163839-PA, 2014.
[15] CHEN C, MARTYSEVICH V, OCONNELL P, et al. Temporal evolution of the geometrical and transport properties of a fracture/proppant system under increasing effective stress[J]. SPE Journal, 2015, 20(3): 527-535.
[16] MUELLER M, AMRO M. Indentation hardness for improved proppant embedment prediction in shale formations[R]. SPE 174227, 2015.
[17] AWOLEKE O, ZHU D, HILL A D. New propped-fracture-conductivity models for tight gas sands[J]. SPE Journal, 2016, 21(5): 1-10.
[18] 徐芝纶. 弹性力学简明教程[M]. 4版. 北京: 高等教育出版社, 2013: 228-230.
XU Zhilun. Short course of elasticity[M]. 4th ed. Beijing: Higher Education Press, 2013: 228-230.
[19] JOHNSON K L. Contact mechanics[M]. Cambridge: Cambridge University Press, 1985.
[20] BIG-ALABO A, HARRISON P, CARTMELL M P. Contact model for elastoplastic analysis of half-space indentation by a spherical impactor[J]. Computers & Structures, 2015, 151: 20-29.
[21] SONG Z, KOMVOPOULOS K. Elastic-plastic spherical indentation: Deformation regimes, evolution of plasticity, and hardening effect[J]. Mechanics of Materials, 2013, 61(8): 91-100.
[22] BARTIER O, HERNOT X, MAUVOISIN G. Theoretical and experimental analysis of contact radius for spherical indentation[J]. Mechanics of Materials, 2010, 42(6): 640-656.
[23] STRONGE W J. Impact mechanics[M]. Cambridge: Cambridge University Press, 2000.
[24] STRONGE W J. Contact problems for elasto-plastic impact in multi-body systems[J]. Lecture Notes in Physics, 2000, 551: 189-234.
[25] ZHAO Y W, MAIETTA D M, CHANG L. An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow[J]. Journal of Tribology, 2000, 122(1): 86-93.
[26] BRAKE M R. An analytical elastic-perfectly plastic contact model[J]. International Journal of Solids & Structures, 2012, 49(22): 3129-3141.
[27] KOGUT L, ETSION I. Elastic-plastic contact analysis of a sphere and a rigid flat[J]. Journal of Applied Mechanics, 2002, 69(5): 657-662.
[28] FRANCIS H A. Phenomenological analysis of plastic spherical indentation[J]. Journal of Engineering Materials & Technology Transactions of the ASME, 1976, 98(3): 272-281.
[29] ZHANG J J, OUYANG L, HILL A D, et al. Experimental and numerical studies of reduced fracture conductivity due to proppant embedment in shale reservoirs[R]. SPE 170775, 2014.
[30] HAN J H, WANG J Y, PURI V. A fully coupled geomechanics and fluid flow model for proppant pack failure and fracture conductivity damage analysis[R]. SPE 168617, 2014.
Outlines

/