Investigation of the influence of asphaltene deposition on oilfield development using reservoir simulationl

Expand
  • 1. Saint-Petersburg Mining University, Saint-Petersburg 199106, Russia;
    2. LLC Tyumen Petroleum Research Center, Tyumen 625000, Russia;
    3. Department of Chemistry, Faculty of Basic Sciences and Engineering, Gonbad Kavous University, Gonbad Kavous 49717-99151, Iran;
    4. LLC SamaraNIPIneft, Samara 443010, Russia

Received date: 2021-11-14

  Revised date: 2022-08-15

  Online published: 2022-08-17

Abstract

This paper investigates the deposition of asphaltenes in the porous medium of the studied field in Russia and predicts production profiles based on uncertainty evaluation. This problem can be solved by dynamic modeling, during which production profiles are estimated in two scenarios: with and without the activation of the asphaltene option. Calculations are carried out for two development scenarios: field operation under natural depletion and water injection into the aquifer as a reservoir pressure maintenance system. A full-scale compositional reservoir simulation model of the Russian oilfield was created. Within a dynamic simulation, the asphaltene option was activated and the asphaltene behavior in oil and porous medium was tuned according to our own special laboratory experiments. The model was also matched to production historical data, and a pattern model was prepared using the full-scale simulation model. Technological and the asphaltene option parameters were used in sensitivity and an uncertainty evaluation. Furthermore, probable production profiles within a forecast period were estimated. The sensitivity analysis of the pattern model to input parameters of the asphaltene option allowed determining the following heavy-hitters on the objective function: the molar weight of dissolved asphaltenes as a function of pressure, the asphaltene dissociation rate, the asphaltene adsorption coefficient and the critical velocity of oil movement in the reservoir. Under the natural depletion scenario, our simulations show a significant decrease in reservoir pressure and the formation of drawdown cones leading to asphaltene deposition in the bottom-hole area of production wells, decreasing their productivity. Water injection generally allows us to significantly reduce the volume of asphaltene phase transitions and has a positive effect on cumulative oil production. Injecting water into aquifer can keep the formation pressure long above the pressure for asphaltene precipitation, preventing the asphaltene deposition resulted from interaction of oil and water, so this way has higher oil production.

Cite this article

TANANYKHIN D.S., STRUCHKOV I.A., KHORMALI A., ROSCHIN P.V. . Investigation of the influence of asphaltene deposition on oilfield development using reservoir simulationl[J]. Petroleum Exploration and Development, 0 : 20221020 -20221020 . DOI: 10.11698/PED.20210811

References

[1] ALVARADO V, WANG X, MORADI M.Role of acid components and asphaltenes in Wyoming water-in-crude oil emulsions[J]. Energy & Fuels, 2011, 25(10): 4606-4613.
[2] KOCABAS I, ISLAM M R.A wellbore model for predicting aspholtene plugging[R]. SPE 49199-MS, 1998.
[3] KORD S, MOHAMMADZADEH O, MIRI R, et al.Further investigation into the mechanisms of asphaltene deposition and permeability impairment in porous media using a modified analytical model[J]. Fuel, 2014, 117(Part A): 259-268.
[4] HEINEMANN Z E, GERKEN G, VON HANTELMANN G.Using local grid refinement in a multiple-application reservoir simulator[R]. SPE 12255-MS, 1983.
[5] DE TULLIO M D, DE PALMA P, IACCARINO G, et al. An immersed boundary method for compressible flows using local grid refinement[J]. Journal of Computational Physics, 2007, 225(2): 2098-2117.
[6] STRUCHKOV I A, ROGACHEV M K, KALININ E S, et al.Laboratory investigation of asphaltene-induced formation damage[J]. Journal of Petroleum Exploration and Production Technology, 2019, 9(2): 1443-1455.
[7] GHADIMI M, AMANI M J, GHAEDI M, et al.Modeling of formation damage due to asphaltene deposition in near wellbore region using a cylindrical compositional simulator[J]. Journal of Petroleum Science and Engineering, 2019, 173: 630-639.
[8] ISMAIL A, HAZEM Y, AL OBAIDI M N, et al. Assisted history matching and uncertainty analysis workflow for a large oilfield in Middle East[R]. SPE 196729-MS, 2019.
[9] MATHEWS P G.Design of experiments with MINITAB[M]. Milwaukee: ASQ Quality Press, 2005.
[10] MCKAY M D, BECKMAN R J, CONOVER W J.A comparison of three methods for selecting values of input variables in the analysis of output from a computer code[J]. Technometrics, 2000, 42(1): 55-61.
[11] YASEEN S, MANSOORI G A.Asphaltene aggregation due to waterflooding (a molecular dynamics study)[J]. Journal of Petroleum Science and Engineering, 2018, 170: 177-183.
[12] KAMATH V A, YANG J D, SHARMA G D.Effect of asphaltene deposition on dynamic displacements of oil by water[R]. SPE 26046-MS, 1993.
[13] ATTAR M S, SEDAGHAT M H, KORD S, et al.Field development strategy through full-filed reservoir simulation considering asphaltene precipitation and deposition[R]. SPE 175684-MS, 2015.
Options
Outlines

/